Makita DTD171Z, 18v [Bare-Unit] Cordless Impact Driver
$298.06 w/GST
- ULTRA-COMPACT and perfect balance at only 116 mm long for maximum control and maneuverability
- Redesigned mode selection switch for one-handed mode selection
- Dual LED lights on both sides illuminate the work area for increased visibility
- Standard Equipment:
- No Battery and No Charger
- Phillips Bit
- Belt Clip
- Connector Case
Out of stock
[Check availability before check out]| Capacity-Machine Screw | M4 – M8 (5/32” – 5/16”) |
| Standard Bolt: M5 – M16 (3/16” – 5/8”) | |
| High Tensile Bolt: M5 – M14 (3/16” – 9/16”) | |
| Coarse thread (in length): 22 – 125 mm (7/8” – 4-7/8”) | |
| Hex Shank | 6.35 mm (1/4”) |
| No Load Speed (RPM) | 0 – 3,600 / 3,200 / 2,100 / 1,100 / 3,600 |
| Impacts Per Minute (IPM) | 0 – 3,800 / 3,600 / 2,600 / 1,100 / 2,600 |
| Max Fastening Torque | 180 N·m (1,590 in.lbs.) |
| Sound Power Level | 108 dB(A) |
| Dimensions | 116x79x236 mm |
| (L x W x H) | (4-9/16”x3-1/8”x9-1/4”) |
| Net weight | 1.2 – 1.6 kg (2.7 – 3.4 lbs.) |
| Brands | |
|---|---|
| Sub-Categories | |
| Power Source |
Be the first to review “Makita DTD171Z, 18v [Bare-Unit] Cordless Impact Driver”
Related products
Rotary Hammer
$210.73 w/GST
Sander, Polisher
$564.38 w/GST
Drill (Steel, Wood)
$391.31 w/GST
Impact Wrench
$2,649.91 w/GST
$243.43 w/GST
Out of stock
Drill (Steel, Wood)
$461.07 w/GST
Cutting (Masonry, Concrete)
$748.47 w/GST
Hammer Drill (Steel, Wood, Masonry)
Makita HP2050, 20mm (3/4″) 2-Speed Hammer Drill 720w [cb419]
$196.20 w/GST
Reviews
There are no reviews yet.